Skip to main content

Study Skills

Concepts, Practices, Tips & Techniques to make your entrance preparation more effective.

Getting to the Top
Yes... you have a desire - to become a Doctor or Engineer. To acquire a top rank in Med/Engg. Entrance you should have a systematic and well planned preparation. This section will give you tips and techniques to perfect your preparation.

SETTING GOALS
If you want to achieve success in life then you should have a definite aim. You must dare to think Big and Dream Big. You must be clear about what you want to achieve. Setting specific goals is the first step towards greater achievements. Always aim to be the best. If you don't have any specific plan in your life yet, then make up your mind to frame your aim now itself.

Set your Goals...Now!
Once you have chosen your goals, write them in your personal diary. Write down your short-term goals and long-term goals. Now your intermediate goal is to gain a top rank in entrance exam. Your goals should be: - SMART

S - Specific
M - Measurable
A - Achievable
R - Reasonable
T - Time bound

Congratulations! - You have a SMART goal! To be an Engineer/Doctor

Make a Study Plan
Make a list of things/tasks you have to do on a day-to-day basis in order to reach your smart goal. Make a study plan right now; how many hours you have to spend on study and related activities, how many hours you need to spend on each subjects etc. And now take action. There is no reward without effort. Remember the words of Albert Einstein - 'Genius is 1% inspiration and 99% perspiration.'


THIS IS A LONG ARTICLE (AROUND 12-15 TIMES BIGGER THAN WHAT YOU SEE HERE)

IF YOU REQUIRE THE FULL ARTICLE,
- ADD YOUR E-MAIL ADDRESS IN A COMMENT TO THIS POST
OR
- SEND A REQUEST E-MAIL TO MY E-MAIL ADDRESS.

Comments

  1. Anonymous06 August, 2004 02:00

    Hi Hunk
    This is your bro
    Your blog posts are impressive

    ReplyDelete

Post a Comment

Comments are moderated, and are usually posted within 24 hours if approved. You must have a minimum of OpenID to post comments.

Popular posts from this blog

Can't exit Toddler Lock on Android phone

Toddler Lock will lock your Android phone completely so you can give it to a baby or toddler to play with. The only danger from the kid is that it may throw your phone and break it. But other than that, the kid will not be able to damage the phone by unlocking it and messing with what's inside. Here's the problem. The security of Toddler Lock is so tight that it would seem the only way to exit out of the app is to tap four corners of screen in a clockwise direction. (Note that you have to tap the four corners one after the other. Tap any corner, remove your finger, tag next corner in CW direction, remove your finger, and so on. Some people seem to think you need to hold all corners simultaneously which is wrong.) You may think a restart may also unlock it but even pulling out the battery for minutes (or perhaps hours) will not help. You will be stuck in Toddler Lock no matter what. This is fine until my screen started having problems. Two of the four corners I had to touch...
Post a Comment
Read more

Make Samsung DVD-C350 region-free

Update 2: An anonymous commentator has shown me a way to make Region 1 players (such as DVD-H1080R) region-free by first converting it to Region 3, then applying my region-free hack below. For details, click here or look for a comment by an Anonymous user dated 18 April 2011. Update: The instructions in the original post below did not make the DVD player region-free. Instead it only locked it to region 1. Many thanks to Anonymous who posted the first comment on this post, I now have alternate instructions. Note: If you have edited the numbers menu (see original post) , I suggest you return it to the original settings you had backed up. A modified numbers menu may prevent the instructions below from working properly.
62 comments
Read more

Group, Ungroup and Regroup disabled in Word

I was editing a Microsoft Word document which had a collection of shapes and text boxes grouped together. I wanted to modify some of the shapes, and therefore I had to ungroup them. But when I right-click the group and open the Group menu, all three options namely Group, Ungroup and Regroup are completely disabled or grayed out. I couldn’t figure out what’s wrong. This group of objects is perfectly ungroupable, and I can even select objects within the group. However, Microsoft Word 2007 is not letting me ungroup it. I searched the Internet for a solution, but did not find anything very useful. The closest I came across is this statement: “The type of Text Wrapping doesn't make any difference as long as it isn't In Line with Text.” ( Link here ) Anyway, I changed the text wrapping of the group of objects from ‘In line with Text’ to ‘Tight’ and viola! I could now ungroup it and edit it. The document got a bit messed up when I did so, but after I ungrouped, edited and regro...
10 comments
Read more