Skip to main content

Annoying skipping and chopping problem - Shivering Computer™

One day you turn on your computer, start boot into Windows and discover a brand new problem, right from the time the Windows loading bar showed up.

  • Booting Windows seems to take longer than last time.
  • Start-up (after the boot, before the desktop is shown) is very slow.
  • Windows start-up sound is being very choppy.
  • Mouse pointer skips a lot when you move it around.
  • Any video or music that you play becomes choppy.
  • Basically, the whole computer just freezes, doing the two points above and more, for fraction of a second, every 5-10 seconds.

If this is your case, there's only one definite solution to this problem. For your reference, I found it in this page: Odd XP Problem: Audio and Mouse Skipping and Jittering / Overall system slowness - Hardware Discussions - FiringSquad Forums

SickComputer-copy

The Prescription (what you need to do):

  1. In Start Menu (or on Desktop), right click on My Computer > Properties > Hardware > Device Manager. (Or you can also right click on My Computer > Manage > Device Manager (under System Tools on left).
  2. Extend the "IDE ATA/ATAPI Controllers" group by clicking on the [+] sign.
  3. Right click on "Primary IDE Channel" and click Uninstall.
  4. You will be asked to confirm the uninstall. Answer Yes.
  5. You will then be asked to restart. Answer Yes. (If computer doesn't do anything, restart manually using Start Menu).
  6. Upon restart (you'll notice faster boot time), Primary IDE Channel and your hard disk drivers will be installed, and you will be asked to restart again. Answer Yes.
  7. Upon second restart, you'll notice the problem is fully gone for good, plus boot time is much faster.

I really don't know for sure how Primary IDE Channel is linked with this Shivering Computer™ problem, but from my understanding, I think it is because of IDE channel drivers becoming corrupt due to installation of proprietary Bluetooth drivers or some other software (not sure what). This causes any instance of accessing the hard disk to freeze the computer, because of the corrupt drivers making Windows unable to properly access the hard disk without issues. Reinstalling the hard disk drivers (as you did by steps above) helps restore the drivers to their original version, thus putting an end to this annoying problem.

Comments

  1. Thanks allot, i've been struggling with my laptop for too long, that really helped.
    I did everything i could, i formatted, opened my laptop to pieces, upgraded rams nothing worked.
    Thank you again..

    ReplyDelete

Post a Comment

Comments are moderated, and are usually posted within 24 hours if approved. You must have a minimum of OpenID to post comments.

Popular posts from this blog

Can't exit Toddler Lock on Android phone

Toddler Lock will lock your Android phone completely so you can give it to a baby or toddler to play with. The only danger from the kid is that it may throw your phone and break it. But other than that, the kid will not be able to damage the phone by unlocking it and messing with what's inside. Here's the problem. The security of Toddler Lock is so tight that it would seem the only way to exit out of the app is to tap four corners of screen in a clockwise direction. (Note that you have to tap the four corners one after the other. Tap any corner, remove your finger, tag next corner in CW direction, remove your finger, and so on. Some people seem to think you need to hold all corners simultaneously which is wrong.) You may think a restart may also unlock it but even pulling out the battery for minutes (or perhaps hours) will not help. You will be stuck in Toddler Lock no matter what. This is fine until my screen started having problems. Two of the four corners I had to touch...

Make Samsung DVD-C350 region-free

Update 2: An anonymous commentator has shown me a way to make Region 1 players (such as DVD-H1080R) region-free by first converting it to Region 3, then applying my region-free hack below. For details, click here or look for a comment by an Anonymous user dated 18 April 2011. Update: The instructions in the original post below did not make the DVD player region-free. Instead it only locked it to region 1. Many thanks to Anonymous who posted the first comment on this post, I now have alternate instructions. Note: If you have edited the numbers menu (see original post) , I suggest you return it to the original settings you had backed up. A modified numbers menu may prevent the instructions below from working properly.

Group, Ungroup and Regroup disabled in Word

I was editing a Microsoft Word document which had a collection of shapes and text boxes grouped together. I wanted to modify some of the shapes, and therefore I had to ungroup them. But when I right-click the group and open the Group menu, all three options namely Group, Ungroup and Regroup are completely disabled or grayed out. I couldn’t figure out what’s wrong. This group of objects is perfectly ungroupable, and I can even select objects within the group. However, Microsoft Word 2007 is not letting me ungroup it. I searched the Internet for a solution, but did not find anything very useful. The closest I came across is this statement: “The type of Text Wrapping doesn't make any difference as long as it isn't In Line with Text.” ( Link here ) Anyway, I changed the text wrapping of the group of objects from ‘In line with Text’ to ‘Tight’ and viola! I could now ungroup it and edit it. The document got a bit messed up when I did so, but after I ungrouped, edited and regro...